3 thoughts on “How to choose lighting in the design of the exhibition?”
Bernard
， During the design of the exhibition design, the designer's adoption of lights is generally overall or mixed. In the form of lighting lighting, the design of the exhibition is similar to the decoration of the room, and it is basically divided into three types of lighting: centralized light sources, auxiliary light sources, and universal light sources. Three lacks are indispensable and should be used alternately. The proportion of light brightness is about 5: 3: 1. Concentrated light sources, concentrated light sources are direct shot lights, and irradiated in a certain limited area with centralized direct light, allowing visitors to see the exhibits that are being conducted. The size of the beam. Therefore, direct lights are usually equipped with cover or cooling wind holes. And the lampshade is an opaque lamp. The common spotlights, orbital lights, and working lights are common in the exhibition. The auxiliary light source, the intensity of the concentrated light source is very strong. If the eyes are in this environment for a long time, it is easy to feel fatigue. Therefore, the auxiliary light source needs to be built in the exhibition to make the staff and visitors feel comfortable. The auxiliary light source lights are diffused light, and the light spreads to each corner of the booth is the same. Generally speaking, it is used with scattered light and direct lights. The general light source, which is generally located in the ceiling in the exhibition hall, is the general light source. Usually it is the main lamp of the entire exhibition hall, also known as the background light. The exhibition hall provides the same light, so there is no obvious shadow, and there is no serious contrast to the light and no one. But because it must be used with other light. Therefore, it should not be very bright. Compared with other light sources in the home, its brightness is the lowest. In short, this "5: 3: 1 golden law of light intensity," The so -called "5" refers to the most strong concentrated light, such as projection lights. "3" refers to the auxiliary light source that gives a soft feeling. "1" is the most basic light source for the entire exhibition hall.
业 Compared with ordinary commercial space, the lighting of the booth space should highlight the key parts or characteristic parts of the exhibits. When the audience visits, the lighting can play a role and can see the advantages of the exhibits. At the same time, while highlighting the main advantages of the exhibits, the lighting of the display space also provides an elegant display space. It cannot unilaterally reflect the display effect, so that the lights are too bright, and the audience is too dazzling when visiting. Different exhibits, the lighting design of the display space is definitely different. For example, the lamps of the car display space are generally high and the brightness will be relatively large. The display of jewelery is mainly illuminated by shooting lights, highlighting the brilliantness and noble jewelry of jewelry. The multi -light source needs to be designed according to the different nature of the exhibitors, and it is necessary to take care of the mutual relationship between different light sources in the display space. In particular, the existence of lights at the exhibition exhibition is not isolated. Through the interaction between different light sources, the space can create different visual effects according to the different needs of exhibits. The usual method is to use the main light source to provide a uniform brightness for the exhibition, and use other light sources such as halogen and LED lights to emphasize key lighting or local lighting. While enriching the level of space Focusing on the effects of display effects, the content of the exhibition space is rich, and the guidance of the customer base is stronger.
加 The exhibition design is an enterprise participating in the exhibition and promoting its own brand and brand products. There are quite a lot of commercial competition between enterprises and enterprises. Everyone wants to make their booths prominent in light design. The overall shape is as bright as possible to illuminate the header and theme shape. Secondly, the brand LOGO and the product are prominent through local lighting. Generally, the high -light gold halogen or LED headlights will be selected. The nature of the exhibition hall design and exhibition design is different. First of all, there is no competition with other exhibition halls. The design hall design only considers the exhibition hall itself; from environmental analysis, the exhibition hall environment lighting is bottomed, and the environmental illumination is 100 ~ 150 ~ 200lx. Secondly, the exhibits will be focused on the exhibition hall. If there are special themes in the exhibition hall, the theme will be created by various lights. Secondly, analysis from the selection of light sources, LED light sources are generally used, which are mainly environmentally friendly and power -saving. Compared with the same power, the same power light of the incandescent lamps and mercury lamps of the golden halogen lamps. Low, it can well protect precious cultural relics and exhibits from damage to the light.
， During the design of the exhibition design, the designer's adoption of lights is generally overall or mixed. In the form of lighting lighting, the design of the exhibition is similar to the decoration of the room, and it is basically divided into three types of lighting: centralized light sources, auxiliary light sources, and universal light sources. Three lacks are indispensable and should be used alternately. The proportion of light brightness is about 5: 3: 1. Concentrated light sources, concentrated light sources are direct shot lights, and irradiated in a certain limited area with centralized direct light, allowing visitors to see the exhibits that are being conducted. The size of the beam. Therefore, direct lights are usually equipped with cover or cooling wind holes. And the lampshade is an opaque lamp. The common spotlights, orbital lights, and working lights are common in the exhibition. The auxiliary light source, the intensity of the concentrated light source is very strong. If the eyes are in this environment for a long time, it is easy to feel fatigue. Therefore, the auxiliary light source needs to be built in the exhibition to make the staff and visitors feel comfortable. The auxiliary light source lights are diffused light, and the light spreads to each corner of the booth is the same. Generally speaking, it is used with scattered light and direct lights.
The general light source, which is generally located in the ceiling in the exhibition hall, is the general light source. Usually it is the main lamp of the entire exhibition hall, also known as the background light. The exhibition hall provides the same light, so there is no obvious shadow, and there is no serious contrast to the light and no one. But because it must be used with other light. Therefore, it should not be very bright. Compared with other light sources in the home, its brightness is the lowest. In short, this "5: 3: 1 golden law of light intensity," The so -called "5" refers to the most strong concentrated light, such as projection lights. "3" refers to the auxiliary light source that gives a soft feeling. "1" is the most basic light source for the entire exhibition hall.
业 Compared with ordinary commercial space, the lighting of the booth space should highlight the key parts or characteristic parts of the exhibits. When the audience visits, the lighting can play a role and can see the advantages of the exhibits. At the same time, while highlighting the main advantages of the exhibits, the lighting of the display space also provides an elegant display space. It cannot unilaterally reflect the display effect, so that the lights are too bright, and the audience is too dazzling when visiting. Different exhibits, the lighting design of the display space is definitely different. For example, the lamps of the car display space are generally high and the brightness will be relatively large. The display of jewelery is mainly illuminated by shooting lights, highlighting the brilliantness and noble jewelry of jewelry. The multi -light source needs to be designed according to the different nature of the exhibitors, and it is necessary to take care of the mutual relationship between different light sources in the display space. In particular, the existence of lights at the exhibition exhibition is not isolated. Through the interaction between different light sources, the space can create different visual effects according to the different needs of exhibits. The usual method is to use the main light source to provide a uniform brightness for the exhibition, and use other light sources such as halogen and LED lights to emphasize key lighting or local lighting. While enriching the level of space Focusing on the effects of display effects, the content of the exhibition space is rich, and the guidance of the customer base is stronger.
加 The exhibition design is an enterprise participating in the exhibition and promoting its own brand and brand products. There are quite a lot of commercial competition between enterprises and enterprises. Everyone wants to make their booths prominent in light design. The overall shape is as bright as possible to illuminate the header and theme shape. Secondly, the brand LOGO and the product are prominent through local lighting. Generally, the high -light gold halogen or LED headlights will be selected. The nature of the exhibition hall design and exhibition design is different. First of all, there is no competition with other exhibition halls. The design hall design only considers the exhibition hall itself; from environmental analysis, the exhibition hall environment lighting is bottomed, and the environmental illumination is 100 ~ 150 ~ 200lx. Secondly, the exhibits will be focused on the exhibition hall. If there are special themes in the exhibition hall, the theme will be created by various lights. Secondly, analysis from the selection of light sources, LED light sources are generally used, which are mainly environmentally friendly and power -saving. Compared with the same power, the same power light of the incandescent lamps and mercury lamps of the golden halogen lamps. Low, it can well protect precious cultural relics and exhibits from damage to the light.