fine jewelry wholesale online How can such necklace ropes be tied to telescopic and contracted like the original? Ask the tall guidance!

jewelry candles wholesale 2012-10-30 14:20 necklace lanyard tipping methods now more and more friends who like Daiyu are more and more. Seeing a piece of beautiful jade you like, I really want to match a beautiful rope. Intersection A beautiful latch rope with the right jade is the complete necklace. It will appear the perfect decorative effect on the neck. But many friends do not know how to tie the lanyard of the jade articles, and the correct binding method of the jade lane rope is presented below.
The first step: Boil the head of the two ropes with a lighter, and turn the rope to the tip of the rope while not solidified.

Step 2: Separate two ropes, turn the rope on the right to the top, and bend to the left. Then the rope on the left pressed the rope on the right, walked around, and walked over from the hole bent over the right rope. Tighten 2 ropes.

The third step: turn the rope on the left to the top, bend to the right, pull the rope on the right, go around, wear it from the hole in the left rope, tighten 2 ropes.

The 4th step: Repeat the second step, turn the rope on the right to the top and bend to the left. Then the rope on the left pressed the rope on the right, walked around, and walked over from the hole bent over the right rope. Tighten 2 ropes.

The after this step, it is basically OK. If it is not tight, you can repeat the method of the third step. If you think it's okay, just look down: Last step: Cut the ropes on both sides, there is a short section, don't cut too bald. Then burn it with a lighter, and stick it there after melting.

did you learn? The rope tied out like this will not turn back and forth.
The stretching method of the jade latch below: Generally, the lanyard we buy is adjusted, and the lane rope made by the week is adjusted. How to stretch to the length that suits you? When you see the rope (below):

If you feel small, the headhole does not go in, just pull the rope on both sides (below):
The two thread holes are encountered together. At this moment, the maximum length (below):

. After wearing it on the neck, hold 2 beads and thread holes together to pull them on both sides. Pull to the end and return to the original look (below):

It if you feel that the pendant is a bit too low, if you want to rise a little, you can pull the two beads of the rope (don't pull the thread hoop) Pull to both sides (below):

kept to the end, the two thread holes were touched together, and beads were hung outside. At this moment, the shortest length (below):
Okay, do you understand? The biggest thing that can be adjusted is the biggest is to adjust how to wear it. The necklace can be changed to the sweater chain.